following on with the cooling etc

http://www.locostbuilders.co.uk/viewthread.php?tid=115155

ive done this too
Rescued attachment CARBON INTAKE.jpg

this
Rescued attachment PASS SIDE COOLING.jpg

this
Rescued attachment DRIVERS COOLING.jpg

and this

cool ait to filter
Rescued attachment TOP PIC COOLING.jpg

did claire make those for you?

they look class!

what do the duct lead to? can't see in the pictures

edited, just noticed the big filter next to the header tank!


[Edited on 19/6/09 by omega0684]

Thats a good idea!

I keep meaning to do something similar to the TVR.... the problem is compounded by the fact that the engine is not a crossflow so the exhaust and inlet share the same hot air!

quote:

---

Originally posted by omega0684
did claire make those for you?

they look class!

what do the duct lead to? can't see in the pictures

edited, just noticed the big filter next to the header tank!


[Edited on 19/6/09 by omega0684]

---

Nice. Seen one like that before.

well cooling and vents must work, engine temps are down, can feel the warm air coming through the mesh side vents i made up.
Yahoo,

You coulld improve the cooling by fitting baffle plates to each side of the rad to block the gap between there and the bonnet webs.

I mounted mine to the bosses on the front of the rad tanks.

adrian

nice work mate!

Any more little fixes planned? Did I read you got new wheels?
Any photos?