Don't worry - I'm running out of questions about wipers! 
This will hopefully be the last one - what size wiper arms and blades are people using? My screen's going to be pretty much standard size (maybe
slightly taller by an inch).
I'm guessing that it'll be standard Mini arms with 10" blades, but I don't want to buy the wrong size (Like I usually do... 
).
Ta.
What motor and wheel boxes have you used david?
Lolocosts new namescroll down Id use these 23.50 posted cant be bad.
I will send you down some brand new ones then thats you sorted
Thanks Patrick!
[Edited on 2/1/10 by David Jenkins]
MG Midget arms might be worth looking at , they are shorter than a Mini arm.
2cv arms are good if you can find them....
There here on the workshop desk was ordered and got lost somewhere......got another set from Caterham and the others turned up three months later..
Check tek automotive for the bits
How much do you want Patrick? I have a couple of cut down MG B arms I buggered, so want to start again. Unless Mr. J wants to come over and arm
wrestle for them.
[Edited on 3/1/10 by RK]
quote:
Originally posted by RK
I have a couple of cut down MG B arms I buggered.
Series2 Landrover arms and blades are very good value. Link: http://www.landroverspares.co.uk/category.html?id=231