Board logo

Ali polihing
matty h - 14/6/10 at 10:43 PM

Any recomendations for polishing ali side panels have been using autosole but is there anything else out there which is quicker to use.

mangogrooveworkshop - 14/6/10 at 11:22 PM

the finest wet and dry with hand soap to get the scratches out....then mothers polish google mothers linky

Cheers Paddy

MK9R - 15/6/10 at 07:27 AM

use an electric buffer with the auto sol, makes it a lot easier

Bluemoon - 15/6/10 at 09:02 AM

Or buy buffing wheels and compounds... Working this out at the moment (have a silver line rotary machine, with a suitable adapter can take standard 8inc buffing wheels...)..

Dan

austin man - 15/6/10 at 10:16 AM

buff it with some paint its far easier to wash it than polish it lol

RichardK - 15/6/10 at 12:33 PM

I used to use autosol but then I was advised to try Mcguires Metal polish I think its called, wouldn't go back now. Top stuff.

Linky

Cheers

Rich

[Edited on 15/6/10 by RichardK]

Bluemoon - 15/6/10 at 03:12 PM

quote:
Originally posted by RichardK
I used to use autosol but then I was advised to try Mcguires Metal polish I think its called, wouldn't go back now. Top stuff.

Linky

Cheers

Rich

[Edited on 15/6/10 by RichardK]



Great stuff when used by hand. Found it not much good on my rotary (to much heat??)...