Board logo

MK Indy scuttle diamensions
craig_thomas - 10/8/16 at 05:14 PM

Could anyone tell me the width/height/length of the MK Indy scuttle/bonnet and nose cone please.

40inches - 10/8/16 at 06:30 PM

I can get those for you tomorrow, if no one else comes forward in the mean time.

craig_thomas - 10/8/16 at 06:43 PM

quote:
Originally posted by 40inches
I can get those for you tomorrow, if no one else comes forward in the mean time.


Cheers mate

40inches - 11/8/16 at 11:09 AM

Dash side of Scuttle width 107cm
Scuttle length 34cm
Scuttle height, engine side 27cm
Bonnet length 87cm
Nose cone, at bonnet fitting point 66cm wide x 20cm high
Nose cone length 60cm
The Scuttle is fitted with the back edge in line with the intersection of the parallel side rails, and the tapered side rails.
From the back of the Scuttle to the end of the step in the nose cone is 152cm i:e the length of the chassis rail.
On mine there is a 40mm gap between the end of chassis rail and the drop in the nose cone.

craig_thomas - 11/8/16 at 01:13 PM

quote:
Originally posted by 40inches
Dash side of Scuttle width 107cm
Scuttle length 34cm
Scuttle height, engine side 27cm
Bonnet length 87cm
Nose cone, at bonnet fitting point 66cm wide x 20cm high
Nose cone length 60cm
The Scuttle is fitted with the back edge in line with the intersection of the parallel side rails, and the tapered side rails.
From the back of the Scuttle to the end of the step in the nose cone is 152cm i:e the length of the chassis rail.
On mine there is a 40mm gap between the end of chassis rail and the drop in the nose cone.


Thanks a lot this is a great help, do you have the engine side scuttle width and scuttle depth?

40inches - 12/8/16 at 12:49 PM

quote:
Originally posted by craig_thomas
quote:
Originally posted by 40inches
Dash side of Scuttle width 107cm
Scuttle length 34cm
Scuttle height, engine side 27cm
Bonnet length 87cm
Nose cone, at bonnet fitting point 66cm wide x 20cm high
Nose cone length 60cm
The Scuttle is fitted with the back edge in line with the intersection of the parallel side rails, and the tapered side rails.
From the back of the Scuttle to the end of the step in the nose cone is 152cm i:e the length of the chassis rail.
On mine there is a 40mm gap between the end of chassis rail and the drop in the nose cone.


Thanks a lot this is a great help, do you have the engine side scuttle width and scuttle depth?


Width 95cm
front to back on centre line25cm
height on centre line 27cm