Board logo

fibreglass kit in charlie browns
antonyg - 19/2/05 at 06:48 PM

Has enyone used the fibreglass kit that charlie browns sell for £11.49 i need to cut my nosecone and extend it but before i buy the kit i want to know if its any good
Thanks


britishtrident - 19/2/05 at 06:51 PM

When buying resin and hardener it is best to get from supplier with a quick stock turn over.


Peteff - 19/2/05 at 07:35 PM

I used an Isopon kit when I split my nosecone (accidentally ) I used it again quite recently to modify an airbox and it was still o.k. There looks a fair bit of mat left for the remaining resin though. As long as it's sealed it should be alright.


Ben_Copeland - 19/2/05 at 10:26 PM

i had resin and hardener in garage cupboard for couple of years.. no problems with it. Nearly gone now tho


Volvorsport - 20/2/05 at 10:57 PM

CFS.net , 3 day delivery , order as much as you want