wrt being in the area - I could be. Just need to find an excuse to spend a day in the Leeds office
[Edited on 26/6/05 by stevebubs]
OK. Fisher Sportscars don't do a shallow bulge that will cover the gaping hole in my Fury bonnet (about 22 in across) so it looks like I'm
looking at a custom solution.
Can anyone point me in the direction of
a)some good resources on fibreglassing, moulding, gelcoat etc
or b) Somewhere that can make a bulge up relatively cheaply
Thanks
Stephen
I've got a mould for an enlarged phoenix bulge which may or may not work? Using part of it perhaps? (I've even got the bit that came out of
the middle of my bonnet when I hacked it apart)
Someone on sylva-chat might have something...
Chris
photo at bottom of this thread:
http://www.locostbuilders.co.uk/viewthread.php?tid=26602
[Edited on 26/6/05 by chriscook]
Chris,
How wide is your bulge across the top?
Cheers
Stephen
[Edited on 26/6/05 by stevebubs]
How about MK's bulge Steve?
Pat...
Dimensions?
The bulge only needs to be shallow - probably less than inch in height, but the dimensions are approx
22in wide x 24 in long
Stephen
There was a post on the size a bit ago - I'll see if I can find it.....
Pat...
Found it...
http://www.locostbuilders.co.uk/viewthread.php?tid=24949
Steve, are you up at all this way in the near future?
Pat...
Cheers for that - could well fit the bill quite nicely.
wrt being in the area - I could be. Just need to find an excuse to spend a day in the Leeds office
[Edited on 26/6/05 by stevebubs]
Hi Steve,
Chris Gamlin has a few bits for me if we can arrange some strategic logistically complicated plan!
I'll buy the coffee this time though!
Pat...
quote:
Originally posted by Avoneer
Hi Steve,
Chris Gamlin has a few bits for me if we can arrange some strategic logistically complicated plan!
I'll buy the coffee this time though!
Pat...
Doncaster is in easy reach for me if that helps.
Pat...
Mine is the same width of the std phoenix one but about 1" taller. No time to measure up i'm afraid off overseas with work tomorrow morning
for 2 weeks.
Chris
Mine is the same width of the std phoenix one but about 1" taller. No time to measure up i'm afraid off overseas with work tomorrow morning
for 2 weeks.
Chris