This is a book chassis but 100mm longer and 100mm wider.

Does any one know of a supplier of body panels i.e. nose cone, bonnet and rear panel.

I was looking that the Luego Vinto but I'm not sure on the dim of the chassis.

Thanks in advance.

Darren at GTS I believe can supply bodywork for the +4 McSorley plans. His new W7DE kit is the same dimensions I believe.

http://www.s123613988.websitehome.co.uk/w7de_body.htm

Hi,
The McSorley 7+4" is only 4" wider, not longer. It is the same length and height as a book chassis.

As said above, Darren at GTS Tuning should be able to help you out.

Cheers,
Craig.

Nosecone and scuttle could definately come from Darren (the scuttle mould was finished last week I'm led to believe!). I'm not sure how they do their back panel though so best to ask Darren about that.
I think you'll need to make your own bonnet though unless they can do you a one-off.

HTH,
James