Board logo

bike mirrors with indicators??!!
chris_smith - 27/9/05 at 06:05 PM

whats everyones opinion on these and how would mr. sva react to them???

cheers chris
http://cgi.ebay.co.uk/Mirrors-with-blinkers-Yamaha-r6-Suzuki-gsxr-Honda-cbr_W0QQitemZ8002922177QQcategoryZ25632QQrdZ1QQcmdZViewItem

[Edited on 27/9/05 by chris_smith]


theconrodkid - 27/9/05 at 06:16 PM

they have to be visible from the side/behind as well so check that first


scutter - 27/9/05 at 06:26 PM

They look similar to a pair that I brought and sold on as the mirror area didn't meet the required spec.

I'd ask the seller to measure the size for you and see if it's greater than 40mm*70mm (the minimum you have to have), hopefully this should save you wasting your cash.

ATB Dan.


Guinness - 27/9/05 at 06:32 PM

I like them, but I think they'd be a post SVA modification.

It depends on what you class them as. If you use them as side repeaters (as Conrod says) they have to be visible from behind. If you use them as your front indicators then they'd have to be no more than 400mm in board from your rear wings.

If you really like them, why not run a wire to the mirrors for future use?

Mike


big_wasa - 27/9/05 at 09:39 PM

Ive had 2 sets for bikes .To be honnest they are to small to be any good as mirrors..But they looked great when fitted.There is a pic of them fitted to my bike in my archive which shows how small they are...


chris_smith - 27/9/05 at 10:56 PM

god damn they are small either that or theres a giant on your bike


britishtrident - 28/9/05 at 12:51 PM

You can buy flexible side repeater LED strips that stick on to mirrors ---
I might be wrong but for SVA istr there is no limmit on the number of side repeaters (with reason ?).


britishtrident - 28/9/05 at 01:00 PM

http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&item=8002944572


RazMan - 28/9/05 at 08:19 PM


I nabbed a set of these a while back - they are ok for repeaters but to be honest they are not bright enough as main indicators.

[Edited on 28-9-05 by RazMan]


locost_bryan - 29/9/05 at 04:13 AM

Adapt a pair from a Merc/Legacy/Accord?