I need to find 2 pieces of 2" filler hose which have a formed 90 degree bend to join my tank fillers to the tanks. Dimensions would be roughly 300mm x 100mm.

The Samco hoses would be ideal but presumeably they are not ok to use with fuel.

Can anyone point me in the right direction?

Can you not use the 2in flexible steel pipe as used in exhausts etc., with 2 small lengths of filler hose to join it to the tank / cap?

[Edited on 4/11/05 by stevebubs]

Car builder solutions. They sorted me out.
www.nfauto.co.uk

SAMCO can be used, but you have to get the fuel specific hose - just a little more expensive than the normal bleeding expensive hose

quote:

---

Originally posted by stevebubs
Can you not use the 2in flexible steel pipe as used in exhausts etc., with 2 small lengths of filler hose to join it to the tank / cap?

---

quote:

---

Originally posted by welderman
Car builder solutions. They sorted me out.
www.nfauto.co.uk

---

quote:

---

Originally posted by MikeR
SAMCO can be used, but you have to get the fuel specific hose - just a little more expensive than the normal bleeding expensive hose

---