I know it's a Cateringvan rip off but I had a spare nosecone with a nasty star crack in it from when I dropped it...
So I was pleased when Caterham brought out their CSR with a vent right where the damage on mine was. Seeing as they have spent ££££s working out where
to put bonnet vents I had the urge to get the jigsaw out and make my own!
£10 for some new stripes, badge and mesh and 2-3hrs I've got a new nose cone. 
[Edited on 31/1/06 by zetec]
Ooops..JPG)
Yet another stunning bit of work from the house of Zetec!! 
What you after! If you want one I'll be happy to lend you my jigsaw .
Yeah but i can't cut straight!! beleive me!! you wait till you see my car, shocking it is
The only thing holding it together is the superb
wiring which i did not touch!!
Jason
quote:
Originally posted by donut
Yeah but i can't cut straight!! beleive me!! you wait till you see my car, shocking it is
NIce job zetec
James, don't even joke about it!
Kev
You beat me to it,i purchased some mesh for the job a couple of months back
At least i now know how it will look.
Oh and andy is right about cutting things straight,ask him how many dashes he went through on the last indy
thats well handy kevin, was thinking of doing the same to mount my oil cooler under there with some fresh air getting to it
That is a very good installation job. I think I may follow your lead! How did you get the mesh to mount from below?
--Chris
Gripfix did the trick...or PU adhesive.
James: If you couldn't kill me with one fatal blow i would come round and punch yer lights out ya cheeky bugger!!
Brilliant job Kevin.....
ATB Fozzie
do look goooood!