I've an opportunty to buy a nose cone at a good price but does anyone know what width this needs to be to fir a McSorley +4 chassis.

I've just been dealing with this on my own chassis as well.

A standard nose will fit the top chassis rails, but the problem is the top of the front "L" section, the outer ends of which stick out when using a standard nose.
The problem with using a wide type (+4) nose is that it may be (not tried one so just guessing) too wide for the top chassis rails!

I have ended up with Westfield nosecone, which I have had to modify to suit, if it helps any it is 27" at the back where it sits on the top chassis rail(I think a standard nose is about 25" here), and is just about wide enough at the front (check the pics in my archive).

Cheers

Alex

Thanks for that, I'll check the dimension on the one on offer.

John.

Theres an alloy one one ebay ........shhhhh dont tell all and sundry

quote:

---

Theres an alloy one one ebay ........shhhhh dont tell all and sundry

---