Dear friends here I show you the last details that I have done in my car with aluminun anodizing proses ,I hope that you like it.
The are done in my shop with a litle equipement that I got in USA. The logos are printed in to the parts during the proses, they are not decals.
Hello from Costa Rica.
Rescued attachment UNIFORME-NIŅOS-CARRO 006.jpg

how did you do that?

Probably something like this

http://www.frost.co.uk/item_Detail.asp?productID=9141&frostProductName=Anodising%20kit%20(5%20litres)

then

http://www.frost.co.uk/item_Detail.asp?productID=9144&frostProductName=Dyeing%20Kit%20RED%205%20Litres



[Edited on 29-6-2006 by Donners90]

but what about the printing/masking?

also I came across recently some DIY anodising - probably on here - , much in the same way as the de-reusting - that looksto be a fraction of the Frost kits.

The trick is that before you ad the color and after the anodizing,I put the desing(cut in a ploter in adesive material) ,very carfull without touching the surface with your fingers and finaly dry it with a blower(industrial is better) .
Rescued attachment UNIFORME-NIŅOS-CARRO 005.jpg