Can someone tell me the best stuff to use as a seal on the under edge of the bonnet please - where you lay it on the body to close it.....thanks, it looks like draught excluder!!!

Thats exactly what it is....

Steve

It is; sort of. It is normally EPDM or neoprene foam with an acrylic adhesive backing. I can get them made to order in limited quantities, just need the width & thickness. You may have to use 2 bits per run, depending on the sheet size they are cut from.

Woolies or Merlin Motorsport will sell it to you of the reel in either 25 or 50mm widths at about 3mm thick.

Self adhesive foam tape can be found in our E-bay shop, or ordered via telephone with card payments, tel 0114 2619633


E-bay item 150022289762

Cheers

Mark

[Edited on 16/10/06 by mac1]

[Edited on 16/10/06 by mac1]