hi guys anyone know where i can get some fuel filler hose from but needs to be a 90º bend one end 50mm(2inch) and the other about 45mm. any ideas appreciated

regards

mark

Its Flexflyte tubing. Expensive, but you can do that in one bit of it.

Very bendy 2" pipe from Europaspares

Don't use a 90 degree bend, put the filler on the top deck . Putting filler on the rear panel makes it a right pain to fill the tank . Next car will have filler inside the rear deck.

thanks will have a look i may not have room for it on the back rear panel anyway so was thinking about putting on top but will still need a tube with the reducer may take a trip to scrapyard first then buy somthing

Europa do some 90 degree bends. The pukka stuff is not cheap though.

quote:

---

Originally posted by rusty nuts
Don't use a 90 degree bend, put the filler on the top deck . Putting filler on the rear panel makes it a right pain to fill the tank . Next car will have filler inside the rear deck.

---