Board logo

Bonnet Buldge
ChrisS - 3/7/07 at 08:22 AM

Hi

I wondered if anyone has an idea where i can get a nice looking bonnet buldge like on the Dax Rush and MK Indy. Im making an ali bonnet otherwise id buy a bonnet with it included.

I want to just graft the fibreglass buldge onto my ali bonnet.

Cheers

ChrisS

ReMan - 3/7/07 at 08:25 AM

Fairly sure MK sell the bulge on it's own

Agriv8 - 3/7/07 at 10:02 AM

Could try MNR .

looking at their website they sell em seperatly.


PS thats what I have fitted

<------------

PPS Marc on his honeymoon So Chris is providing a skelaton service on the workshop e-mail.

regards

Agriv8

Hellfire - 3/7/07 at 12:02 PM

quote:
Originally posted by CaLviNx
quote:
Originally posted by ReMan
Fairly sure MK sell the bulge on it's own


I got a friend to phone to ask them if they would sell a bulge on it own the answer was no............. they would only sell a bonnet & bulge as a pair.


You need a pair of what you're offering in your avatar, cos quite clearly you aint got any of your own ......

Phil

John Bonnett - 3/7/07 at 05:28 PM

Chris, why not make your own bonnet bulge. It's quite easy using aluminium and if you have a look at my website there is a step by step guide covering the one I did for my Phoenix. The finished bulge can be bonded and blended in without too much trouble.

atb

John