following on from my polish perpex thread, Farecla G3 & G7 was suggeswted.

Which one is the finer?

and can it be used for polish paint?

(going to get my painht today so will try to get some ofthis or equivalent)

G3 is rough
G7 is Medium
G10 is fine

I have used all on my Gel coat but it is designed for automotive Paint

Regards

Agriv8

i normally go from G3 to G10. Never used G7 but would probs make the job easier.

is G10 fineer thatn T-cut? or what equivlent grade is T-cut?