LocostBuilders - powered by XMB

Aerosceen to scuttle panel??

Gaz7612 - 21/1/08 at 03:31 PM

Hello everyone.
What is the best way of fixing a grp aeroscreen to the scuttle panel?
Thanks Gaz

Howlor - 21/1/08 at 04:12 PM

I bolted mine down with some M5 stainless countersinks. Although mine was carbon so about 5mm thick so you could just countersink it enough to get the heads flush. Looked really neat once done and easy to remove if you needed to .

Steve

worX - 21/1/08 at 04:16 PM

M5 Stainless buttonheads...
Steve