Board logo

Wide rear wings.
procomp - 3/3/08 at 08:20 AM

Hi i have a customers car coming in soon and he tells me he is having trouble finding rear wing that are 11.5" or 290 mm wide. Any one know who or where to find such items.

I see it has been asked before but was unsure of what widths where wanted.

Any help greatly appreciated.

Cheers Matt

jacko - 3/3/08 at 08:34 AM

Mk indy are 11.5 wide body to edge i have just been in the garage to look

bob - 3/3/08 at 09:46 AM

MK and MAC1 are probably alike, you need to have a look at quality though.

Never really looked at a luego viento rear arches but saw a dax last week which looked very wide.

Hellfire - 3/3/08 at 12:48 PM

I thought MNR did the widest rear arches?

Phil

PAUL FISHER - 3/3/08 at 12:48 PM

Ive fitted the MNR rear arches on my MK because they are a bit wider than the MK ones,they are 295mm to inside lip of arch,and 305mm to outside of the arch.

bob - 3/3/08 at 02:06 PM

I dont know who supplies the MNR glass but i have to admit it does look the best i've seen....so far.

muzchap - 3/3/08 at 02:07 PM

Will that cover 225 rear tyres?

PAUL FISHER - 3/3/08 at 02:48 PM

quote:
Originally posted by muzchap
Will that cover 225 rear tyres?


Yes,well it does on a Indy,15"x 7" wide rims,et 35.

procomp - 3/3/08 at 03:19 PM

Hi do MNR sell them to people not fitting them to MNR's. I am guessing they do if PAUL FISHER has fitted them. I will get the customer to ring and find out for definite.

Thanks for the help and measurements.

Cheers Matt

mistergrumpy - 3/3/08 at 06:14 PM

My Luego ones are 1.5 wide as are GTS ones.

Hellfire - 3/3/08 at 06:51 PM

quote:
Originally posted by procomp
Hi do MNR sell them to people not fitting them to MNR's. I am guessing they do if PAUL FISHER has fitted them. I will get the customer to ring and find out for definite.

Thanks for the help and measurements.

Cheers Matt


Matt,

I believe Marc will sell both front and rear wings to owners of other marques but not bodywork which is unique to MNR's such as nosecone, scuttle, bonnet and side/rear panels.

Phil

[Edited on 3-3-08 by Hellfire]

procomp - 4/3/08 at 08:03 AM

Hi Phil thanks for the conformation. Looks like a set from MNR will do the job.

Cheers Matt