madrallysport
|
| posted on 20/9/09 at 01:39 PM |
|
|
Roll cage Mounting pictures.
Guys can you post me some pictures of your roll cages, going to start mine this week but need a few pointers. My chassis is an aries motorsport one,
i want a full cage as it will be used for hill climbs and sprints. I would also like a few pictures of were the cage mounts to the chassis etc. Many
thanks guys
[Edited on 20/9/09 by madrallysport]
UNDERSTEER is when you hit the wall with the front of the car.
OVERSTEER is when you hit the wall with the rear of the car.
HORSEPOWER is how fast you hit the wall.
TORQUE is how far you take the wall with you.
|
|
|
|
|
MakeEverything
|
| posted on 20/9/09 at 01:52 PM |
|
|
You need the Homologation spec if youre competing. Should find this in the rules somewhere.
Kindest Regards,
Richard.
...You can make it foolProof, but youll never make it Idiot Proof!...
|
|
|
madrallysport
|
| posted on 20/9/09 at 01:59 PM |
|
|
I've a guy who's making the cage for me with approved seamless material, with certs that will meet msa standards, he makes cages for rally
cars as a living but he has never made one for a 7 style car before, i just want to make sure we get it right, its just i've looked at so many
pictures but never see any with were to brace the chassis for mounting the cage on to.
[Edited on 20/9/09 by madrallysport]
UNDERSTEER is when you hit the wall with the front of the car.
OVERSTEER is when you hit the wall with the rear of the car.
HORSEPOWER is how fast you hit the wall.
TORQUE is how far you take the wall with you.
|
|
|
prawnabie
|
| posted on 20/9/09 at 02:03 PM |
|
|
This has always bugged me, are the msa specs for the design of the cage, or just the materials used?
|
|
|
iank
|
| posted on 20/9/09 at 03:14 PM |
|
|
quote:
Originally posted by prawnabie
This has always bugged me, are the msa specs for the design of the cage, or just the materials used?
both.
Blue book online here
http://msauk.org/site/cms/contentviewarticle.asp?article=646
Section with cage specs and drawings is "C(c) Competitors - Safety"
--
Never argue with an idiot. They drag you down to their level, then beat you with experience.
Anonymous
|
|
|
madrallysport
|
| posted on 21/9/09 at 09:40 PM |
|
|
has anyone any pics of cage mounting points
UNDERSTEER is when you hit the wall with the front of the car.
OVERSTEER is when you hit the wall with the rear of the car.
HORSEPOWER is how fast you hit the wall.
TORQUE is how far you take the wall with you.
|
|
|
