Rob James
|
| posted on 14/8/05 at 02:01 PM |
|
|
Air Riveter
Hi All, thinking of buying an air riveter to speed up the process any one done this,any pitfalls. Also any special grade or make of drill bit an
advantage.
cheers Rob
|
|
|
|
|
suparuss
|
| posted on 14/8/05 at 02:39 PM |
|
|
i like the hss cobalt ones, keep a really good cutting edge although a good hss is good enough for ali and steel.
|
|
|
RazMan
|
| posted on 14/8/05 at 09:45 PM |
|
|
I borrowed a cordless rivetter from work - it really saved a hell of a lot of wrist ache ... and was totally quiet too.
If you buy a box of 20 reasonable quality drills for rivetting you will be safe - you will break and mangle a surprising amount while panelling your
chassis.
Cheers,
Raz
When thinking outside the box doesn't work any more, it's time to build a new box
|
|
|
