Jumpy Guy
|
| posted on 10/11/05 at 04:09 PM |
|
|
Material for bonnet
guys, will 18swg half hard alli be any use for a bonnet? too thin? too thick?
got a chance on some cheap.....
|
|
|
|
|
paulf
|
| posted on 10/11/05 at 06:14 PM |
|
|
I made my bonnet from 18 gauge standard [not half hard] ally , anything thicker will be more difficult to form.
Paul.
|
|
|
Mark Allanson
|
| posted on 10/11/05 at 10:04 PM |
|
|
Sounds ideal to me
If you can keep you head, whilst all others around you are losing theirs, you are not fully aware of the situation
|
|
|
Triton
|
| posted on 10/11/05 at 10:10 PM |
|
|
You need the clever stuff as thick ali is ....well thick!
My Daughter has taken over production of the damn fine Triton race seats and her contact email is emmatrs@live.co.uk.
www.tritonraceseats.com
www.hairyhedgehog.com
|
|
|
Jumpy Guy
|
| posted on 11/11/05 at 08:17 AM |
|
|
just checked , and its 18 swg 5251-H22 (NS4)
2m x 1.5 m for £10.65....
|
|
|
jack trolley
|
| posted on 11/11/05 at 06:43 PM |
|
|
I seem to recall in the Tony Weale book that the Lotus 7 bonnet was only 20 swg.
"Add Lightness" as The Blessed Colin said.
|
|
|
Trev D
|
| posted on 11/11/05 at 07:03 PM |
|
|
mine is 20 swg
|
|
|
Peteff
|
| posted on 11/11/05 at 08:28 PM |
|
|
2m x 1.5 m for £10.65
That's a bargain, snatch their hand off, and send me 4 sheets while you're at it.
yours, Pete
I went into the RSPCA office the other day. It was so small you could hardly swing a cat in there.
|
|
|
scutter
|
| posted on 11/11/05 at 08:45 PM |
|
|
Ditto that comment on the price, I'll be interested in 4 sheets if your able to order a large amount.
ATB Dan.
|
|
|
.jpg)
