muzchap
|
| posted on 13/2/06 at 09:32 PM |
|
|
Wing Mirror Advice - are these SVA compliant?
Found these babies on Ebay.
Expensive I know - but I really like them and am prepared to save a little harder 
Are they SVA compliant and general opinions please
IM A MIRROR
Cheers
------------------------------------
If you believe you're not crazy, whilst everybody is telling you, you are - then they are definitely wrong!
------------------------------------
|
|
|
|
|
JohnN
|
| posted on 13/2/06 at 09:40 PM |
|
|
A very real possibility of edges being too sharp - just my opinion, from the photo.
|
|
|
muzchap
|
| posted on 13/2/06 at 09:44 PM |
|
|
thanks John - I'm suspecting that too...
Might have to be later on in the build - like post something..
------------------------------------
If you believe you're not crazy, whilst everybody is telling you, you are - then they are definitely wrong!
------------------------------------
|
|
|
Confused but excited.
|
| posted on 13/2/06 at 10:26 PM |
|
|
OOOOH! NICE!
BAD NEWS:
They also have to deflect under a lateral load of 10Kg, to comply with SVA requirements.
GOOD NEWS:
You can fit them after you pass with those horrible cheap plastic ones!
Tell them about the bent treacle edges!
|
|
|
flak monkey
|
| posted on 13/2/06 at 10:27 PM |
|
|
quote:
Originally posted by Confused but excited.
BAD NEWS:
They also have to deflect under a lateral load of 10Kg, to comply with SVA requirements.
Not on a seven unless you have very long mirror arms.
They only need to deflect if they lay outside the body plan of the vehicle...
David
Sera
http://www.motosera.com
|
|
|
muzchap
|
| posted on 14/2/06 at 09:48 AM |
|
|
Ok he's said he can move on PRICE if we order 5 or more.
So might re-visit post some testy thing :p
Cheers,
Murray
------------------------------------
If you believe you're not crazy, whilst everybody is telling you, you are - then they are definitely wrong!
------------------------------------
|
|
|
