RazMan
|
| posted on 5/6/06 at 09:02 PM |
|
|
Stainless tail pipes?
I'm looking for a pair of stainless steel tail pipes which I can tack on the end of my custom made exhaust.
Ideally 50mm with a rolled edge (for SVA) but an oval might be a bit more interesting.
Any ideas guys? eBay are asking silly prices (£25 each  )
Cheers,
Raz
When thinking outside the box doesn't work any more, it's time to build a new box
|
|
|
|
|
Krismc
|
| posted on 5/6/06 at 09:07 PM |
|
|
AAS Newcastle, if you ask for price ill go in and pick them for you and send to ya!!
I aint got time to go and check prices and then go back again
Built, Ivaed, Drove and now Sold - 2011 MNR VORTX RT+ 2000cc Zetec on R1 Throttle boddies.
|
|
|
Krismc
|
| posted on 5/6/06 at 09:08 PM |
|
|
£7 i would recon
Built, Ivaed, Drove and now Sold - 2011 MNR VORTX RT+ 2000cc Zetec on R1 Throttle boddies.
|
|
|
RazMan
|
| posted on 5/6/06 at 09:20 PM |
|
|
That's awfuly decent of you old chap 
Something like this would be good
I'll give them a bell tomorrow and see what they can do.
Cheers,
Raz
When thinking outside the box doesn't work any more, it's time to build a new box
|
|
|
Johnmor
|
| posted on 5/6/06 at 09:50 PM |
|
|
Ebay !!
I paid £7 for a pair of 60mm tainless tail pipes, 200mm long rolled edge.
[img][/img]
|
|
|
RazMan
|
| posted on 5/6/06 at 09:57 PM |
|
|
The cheapest ones I can find on eBay are £15 each Loads of chrome ones for a few quid but I really need stainless as I am going to cut them up and
weld 100mm onto my system.
[Edited on 5-6-06 by RazMan]
Cheers,
Raz
When thinking outside the box doesn't work any more, it's time to build a new box
|
|
|
RazMan
|
| posted on 6/6/06 at 08:13 AM |
|
|
Another dead end - I phoned AAS and was quoted £20 each for a standard 50mm dia with a rolled end Looks like I'll have to dig a bit deeper
into my overdraft.
Cheers,
Raz
When thinking outside the box doesn't work any more, it's time to build a new box
|
|
|
DarrenW
|
| posted on 6/6/06 at 11:26 AM |
|
|
http://cgi.ebay.co.uk/STAINLESS-STEEL-OVAL-SLASH-EXHAUST-TAIL-PIPE-TRIM-TIP_W0QQitemZ8072553295QQcategoryZ38786QQrdZ1QQcmdZViewItem
|
|
|
RazMan
|
| posted on 6/6/06 at 04:31 PM |
|
|
Cheers Darren, those are a bit cheaper than the ones I spotted so you've just saved me a few quid 
All sorted now. Thanks guys 
Cheers,
Raz
When thinking outside the box doesn't work any more, it's time to build a new box
|
|
|
