johnemms
|
| posted on 13/6/06 at 02:47 PM |
|
|
Rivets.. again...
Been looking through old topics on rivets..
Will the 4 x 10 blind ali rivets from screwfix be good / ok for body panels?
I'll fill the holes in the rivet with a bit of filler as i'm painting the ali body work...
Any comments apreciated ...
cheers
|
|
|
|
|
John Bonnett
|
| posted on 15/6/06 at 04:43 PM |
|
|
Hi, You might care to consider using countersunk rivets. They are less obtrusive and will disappear completely when the panels are painted. Also,
being flush, you can fit a component over the top without the rivet head interfering. I buy my rivets and rivnuts from Primary Fasteners and they are
very helpful with all the technical advice you need. Their website is: http://www.prifast.co.uk/index.htm.
Hope this is of interest.
Cheers
John
|
|
|
