02GF74
|
| posted on 28/11/06 at 01:39 PM |
|
|
wingstays?
1. how much clearence between wing stay and tyre tread? (i.e. top)
2. how much clearance between wing stay and tyre sidewall?
|
|
|
|
|
Hellfire
|
| posted on 28/11/06 at 01:47 PM |
|
|
1 - About 20mm
2 - About 3mm
Phil
[Edited on 28-11-06 by Hellfire]
|
|
|
NS Dev
|
| posted on 28/11/06 at 02:54 PM |
|
|
yep ish
Retro RWD is the way forward...........automotive fabrication, car restoration, sheetmetal work, engine conversion
retro car restoration and tuning
|
|
|
JUD
|
| posted on 28/11/06 at 05:08 PM |
|
|
Sounds about right.
Take care though. I have a gravel drive and have found that I pick up stones which can then get jammed between tire and wing. My nearside wing has a
rather ugly crazed effect where the gelcoat has been "popped" from behind (ooer!).
Martin
---------------------
MK Indy Blade
|
|
|
supercat
|
| posted on 29/11/06 at 01:36 PM |
|
|
And if you are running the wing close to the tyre, make sure you can get the wheel off!
James
|
|
|
