RazMan
|
| posted on 21/5/07 at 02:09 PM |
|
|
Fibreglass sheet
Is it available as a simple flat sheet anywhere? I'm looking into making a prototype diffuser and just need something to get the basic shape
going, then adding & hacking it around accordingly.
Any suppliers out there?
Cheers,
Raz
When thinking outside the box doesn't work any more, it's time to build a new box
|
|
|
|
|
BenB
|
| posted on 21/5/07 at 02:13 PM |
|
|
I found a sheet of melamine, some 600gm weave from CFS and cheap resin makes some pretty quickly...
|
|
|
Phil.J
|
| posted on 21/5/07 at 02:27 PM |
|
|
It's used in the commercial body building trade and available from companies such as Polyfibre in Birmingham.
http://www.polyfibre.co.uk/product.asp
But as BenB has said, you can make a simple inexpensive buck from melamine faced chipboard and hardboard and make your own pre-moulded panels.
[Edited on 21/5/07 by Phil.J]
|
|
|
BenB
|
| posted on 21/5/07 at 02:48 PM |
|
|
And the melamine in my garage is so covered in dust and oil spray that I don't need a release agent 
|
|
|
twybrow
|
| posted on 21/5/07 at 02:57 PM |
|
|
Just look up any industrial laminating company in the book. They will knock you up a flat sheet for peanuts... Alternatively, have a go yourself!
|
|
|
Thinking about it
|
| posted on 21/5/07 at 03:15 PM |
|
|
As Phil.J says Polyfibre in Birmingham. Ask for Mike, he is most helpful. They do carbon fibre, GRP, Epoxy, polyester the lot. I use them for my boat
stuff. I can collect if you get stuck.
|
|
|
