redeye
|
| posted on 28/6/07 at 07:17 PM |
|
|
dzus fasteners
hi
as anyone got close up of their dzus fastener mounts?
im not havin any luck getting the fastener close enought to engage the spring?
cheers
patrick
|
|
|
|
|
David Jenkins
|
| posted on 28/6/07 at 07:36 PM |
|
|
Maybe yours are too short for the thickness of the material? They do come in various lengths.
|
|
|
dave r
|
| posted on 28/6/07 at 08:13 PM |
|
|
lots of lengths as said above of both springs and the rivet part
you can bend the springs a bit, but sounds like you are further away than that ;/
|
|
|
BenB
|
| posted on 28/6/07 at 08:32 PM |
|
|
Yup. I squiijed the spring a little bit cos the ones I bought were too short... Did the job nicely 
|
|
|
redeye
|
| posted on 1/7/07 at 05:03 PM |
|
|
cheers for the replies fellas
squished the springs in a vice and got them to engage now.......bastard of a job but look good now
cheers
patrick
|
|
|
