theconrodkid
|
| posted on 6/8/07 at 02:04 PM |
|
|
L section rubber
i have searched high/low and all points in between,looking for L section rubber seal,legs need to be about 19mm long and about 3 mm thick ,needs to be
bendable ,any ideas peeps?
who cares who wins
pass the pork pies
|
|
|
|
|
mookaloid
|
| posted on 6/8/07 at 02:10 PM |
|
|
I guess you've tried Woolies?
Just had a quick look and found this?
Cheers
Mark
"That thing you're thinking - it wont be that."
|
|
|
BenB
|
| posted on 6/8/07 at 02:33 PM |
|
|
I used a fair bit of that on my build.
It's definately L shaped not L_ if you know what I mean (one of the legs is quite short).
Also its fairly thin rubber (2mm approx).
|
|
|
theconrodkid
|
| posted on 6/8/07 at 02:42 PM |
|
|
ive seen the woolies stuff,legs not long enough,dosnt matter too much about having one short leg (pirate joke in there somewhere?) but one leg needs
to be 19mm min really,2mm thick will do
who cares who wins
pass the pork pies
|
|
|
matt_claydon
|
| posted on 6/8/07 at 03:26 PM |
|
|
Would this one be any good?
http://www.woolies-trim.co.uk/pc-1798-322-rubber-extrusion.aspx
|
|
|
theconrodkid
|
| posted on 6/8/07 at 03:44 PM |
|
|
seen that Matt (long time no see btw),its last resort as i dont really want the curved leg
who cares who wins
pass the pork pies
|
|
|
matt_claydon
|
| posted on 6/8/07 at 03:59 PM |
|
|
How about this:
http://www.polymarine.com/products/parts-and-accessories/rubber-moulded-components/extruded-l-section/index.cfm
4mm thick though which might be a bit bulky.
Keep trying to make WLM meet but with it only being once a month and quite a long trek these days something always seems to get in the way 
September looking possible though.
|
|
|
