jambojeef
|
| posted on 13/8/07 at 03:46 PM |
|
|
Bulges
[Insert your own pun]
Just a quick one - can anyone reccommend a good supplier of GRP bulges to cover my actuator?
I need a fairly little teardrop shape but everything I find either looks like it belongs on some banana yellow Corsa with 12 exhausts or its made from
carbon and £4000!
Anyone know of a good place to supply straightforward grp stuff? I have tried to make my own but its blatently obvious that Ive aken the moulds off a
pyrex dish!
Edit to say: See the avatar for what im trying to cover int he side panel!
Cheers
Geoff
[Edited on 13/8/07 by jambojeef]
|
|
|
|
|
RazMan
|
| posted on 13/8/07 at 03:59 PM |
|
|
Here you go
http://www.mcrallying.net/pages/general/bulges_prod.htm
[Edited on 13-8-07 by RazMan]
Cheers,
Raz
When thinking outside the box doesn't work any more, it's time to build a new box
|
|
|
BenB
|
| posted on 13/8/07 at 04:37 PM |
|
|
Or something like a Mitsi Trojan / L200 SUV bonnet bulge... Stuart Taylor Motorsport use these for their bonnet bulges (though they've now sold
their Locost project onto Aries? motorsport). Might be worth a look....
I'm sure they called it a Trojan after the condom because there's often a knob inside....
|
|
|
David Jenkins
|
| posted on 13/8/07 at 04:42 PM |
|
|
You could try this place:
Redline
I bought my bulge from them - they do another with a closed front as well. Note that they come in grotty grey GRP, which HAS to be painted!
HTH,
David
|
|
|
jambojeef
|
| posted on 13/8/07 at 05:49 PM |
|
|
Thanks a lot gentlemen!
I shall check those out now...
Geoff
|
|
|
