oadamo
|
| posted on 3/12/07 at 09:11 PM |
|
|
nosecone mesh
hi has anyone got the sizes of the mesh that you need. cuz iam having some smart panels cut for it but need the sizes.
adam
i no iam a bit ahead of myself as i havent even bought the nosecone yet. but a guy is cutting them for me for a small fee. so iam gonna get them done
while the offers there 
adam
|
|
|
|
|
chris taylor
|
| posted on 3/12/07 at 09:52 PM |
|
|
Nosecone Mesh
Hi adam
all the nosecones are slightly different and hence are different sizes, it would be a gamble if you had it cut without first having the nosecone to
measure,
regs,
Chris.
|
|
|
austin man
|
| posted on 3/12/07 at 09:53 PM |
|
|
mesh
if you havent got the cone how do you know the size? each manufacturer will probably have a digfferent shape or size albeit slight
|
|
|
oadamo
|
| posted on 3/12/07 at 09:56 PM |
|
|
bugger lol thanks chaps.
adam
|
|
|
oadamo
|
| posted on 3/12/07 at 10:02 PM |
|
|
or anyone got a rough sizes i could get them cut big then cut the outter to size.
adam
|
|
|
David Jenkins
|
| posted on 4/12/07 at 08:51 AM |
|
|
I played around with a sheet of cardboard cut from packaging. Fiddled around until I got a decent fit, then measured it up to see what I needed.
I then used the pattern to mark out the mesh.
HTH
David
|
|
|
westcost1
|
| posted on 4/12/07 at 11:48 AM |
|
|
i just cut it with some tin snips easy
|
|
|
pewe
|
| posted on 4/12/07 at 03:36 PM |
|
|
Just been through the same exercise for the F27. That required a piece 500 x 300mm which will be cut down but as the others have said best to buy a
nose cone then worry about cutting to the correct size.
Cheers, Pewe 
|
|
|
.jpg)
