colt_mivec
|
| posted on 18/2/08 at 11:52 PM |
|
|
Body panels???
Will the luego body panels fit a book chassis Ron Champion second edition book???
Im looking at buying the scuttle from a member???
Thanks in advance
Matt
[Edited on 18/2/08 by colt_mivec]
|
|
|
|
|
Triton
|
| posted on 19/2/08 at 12:31 AM |
|
|
Think they do yes. sure it's same width as book chassis.
Mark
|
|
|
twybrow
|
| posted on 19/2/08 at 12:43 PM |
|
|
But the rear panel does not fit (or at least it won't fit my Stuart Taylor chassis)
|
|
|
richard
|
| posted on 19/2/08 at 06:53 PM |
|
|
We bought the luego panels for our book chassis locost a couple of years ago and all I can say is I hope that the fit has improved since the new man
owns it now. we have the complete set for the velocity and not one of them is any near perfect, had to completly remake the top edge of the rear panel
as it would not fit over one side or the hoop. The scuttle was not a complete mirro image of itself, the side panels had to be bent again at the
bottom edge, the nose cone was all over the place and no it was not my welding.Only wished I had looked around a bit more at the time
|
|
|
Triton
|
| posted on 20/2/08 at 10:13 AM |
|
|
That's making them too quick and pulling from mould when green...the damn stuff as a mind of it's own and still cures for ages
afterwards.
I made a cycle wing real quick and popped it from the mould way to soon, left it on my bench but sat on the wonkavation.....cured with a twist so it
did....
quote:
Originally posted by richard
We bought the luego panels for our book chassis locost a couple of years ago and all I can say is I hope that the fit has improved since the new man
owns it now. we have the complete set for the velocity and not one of them is any near perfect, had to completly remake the top edge of the rear panel
as it would not fit over one side or the hoop. The scuttle was not a complete mirro image of itself, the side panels had to be bent again at the
bottom edge, the nose cone was all over the place and no it was not my welding.Only wished I had looked around a bit more at the time
|
|
|
.jpg)
