eccsmk
|
| posted on 12/4/08 at 10:03 AM |
|
|
edging for stone guards
what can i use and where can i aquire it
thankyou
|
|
|
|
|
worX
|
| posted on 12/4/08 at 10:06 AM |
|
|
What stone guards do you have?
Steve
|
|
|
eccsmk
|
| posted on 12/4/08 at 10:07 AM |
|
|
the stainless ones fron lolocost
http://www.lolocost.co.uk/ASPpages/part_details.asp?PartID=93
[Edited on 12/4/08 by eccsmk]
|
|
|
mangogrooveworkshop
|
| posted on 12/4/08 at 10:07 AM |
|
|
p piping does it
|
|
|
eccsmk
|
| posted on 12/4/08 at 10:11 AM |
|
|
p piping ??
sorry im a bit slow today 
|
|
|
graememk
|
| posted on 12/4/08 at 10:14 AM |
|
|
put them on after sva mate
|
|
|
tegwin
|
| posted on 12/4/08 at 10:17 AM |
|
|
If it sticks up less than 5mm then you dont need a radius!
------------------------------------------------------------------------------------------------------------------------
Would the last person who leaves the country please switch off the lights and close the door!
www.verticalhorizonsmedia.tv
|
|
|
eccsmk
|
| posted on 12/4/08 at 10:20 AM |
|
|
they are rivetted flat to my rear wings and are around 2mm thick so maybe i could get away with them??
graememk to late they are on
you have u2u
|
|
|
Humbug
|
| posted on 12/4/08 at 10:26 AM |
|
|
I had my car SVAd with no stone guards - easier that way. Afterwards I used tadpole beading, but it was difficult to get very neat round the corners.
I later changed the rear wings and made my own stone guards from thin ali. I rivetted them on with not much gap between the rivets and didn't
put any edging on. I think unless the edges really are sharp, it can look "cleaner" with no edging
|
|
|
Paul TigerB6
|
| posted on 12/4/08 at 10:27 AM |
|
|
I'm using this myself
|
|
|
tegwin
|
| posted on 12/4/08 at 11:23 AM |
|
|
I dont see what the issue is!
My windscreen supports are made from 5mm steel plate with NO radiued edges.....the tester was a bit grumpy about it, but because it didnt stick up
more than 5mm he couldnt class it as a sharp edge....ergo, no failure, no issue!
------------------------------------------------------------------------------------------------------------------------
Would the last person who leaves the country please switch off the lights and close the door!
www.verticalhorizonsmedia.tv
|
|
|
philhoward
|
| posted on 12/4/08 at 02:56 PM |
|
|
Have a look at Seals + Direct They do lots of different seals and trims
|
|
|
eccsmk
|
| posted on 12/4/08 at 04:12 PM |
|
|
il risk them as they are then
thanks you peeps
|
|
|
