splitrivet
|
| posted on 26/11/03 at 10:01 AM |
|
|
Rear Wings !!!!!!!
Hey up Guys,Does anyone know the width of the rear wings of any of the manufacturers.Im lookig for some at least 10.5 inches wide to cover the BF
Goodrich tyres Im using.
Just had a sudden thought I'll need that width for the fronts as well, Derrrrrrrrrrrr
Have Lolocost gone tits up, cant seem to get thier website to come up ???
Cheers,
Bob
[Edited on 26/11/03 by splitrivet]
I used to be a Werewolf but I'm alright nowwoooooooooooooo
|
|
|
|
|
Staple balls
|
| posted on 26/11/03 at 10:08 AM |
|
|
www.lolocost.com works .co.uk doesn't.
but apperently they're terrible
|
|
|
zetec
|
| posted on 26/11/03 at 11:59 AM |
|
|
Dax use very wide arches to cover their Carlos Fandango Super Wide wheels. You will also need to check the offset of the wheel you are going to use to
fined how far they stick out from the body.
|
|
|
splitrivet
|
| posted on 26/11/03 at 02:39 PM |
|
|
Ive got 10.5 inches from the body to the outside of the tread so I figure 11 inch should do it comfortably allowing for any hassle with SVA.
Bob
I used to be a Werewolf but I'm alright nowwoooooooooooooo
|
|
|
locoboy
|
| posted on 26/11/03 at 02:58 PM |
|
|
I dont think half and inch is enough, most rear arches turn in towards the body of the car if you view them from the underside.
on mine the turn in is more than half an inch. sorry.
ATB
Locoboy
|
|
|
pbura
|
| posted on 26/11/03 at 04:15 PM |
|
|
I was torched when I found that my 10.5" eBay fenders turn in about 5/8", because I needed all that width for 205 tires (minimum for my
wheels).
Current plan is to cut the edge of the fender off and glass a new one on, using a negative mold.
Pete
|
|
|
splitrivet
|
| posted on 27/11/03 at 10:02 AM |
|
|
Thanks guys, arses, why isnt anything on a locost straightforward.
Wish I'd bid on those 9.5 rear wings on Ebay and widened em now.
Bob
I used to be a Werewolf but I'm alright nowwoooooooooooooo
|
|
|
timf
|
| posted on 27/11/03 at 10:08 AM |
|
|
try dozracing
he does 11.5" wings for £88
on http://www.gtscougar.freeserve.co.uk
|
|
|
wicket
|
| posted on 27/11/03 at 12:25 PM |
|
|
Luego do
280mm (11" inside £83/pair
|
|
|
Hellfire
|
 posted on 28/11/03 at 12:17 AM |
|
|
Sod's Law
Why is it that just when you have taken the plunge you always discover something better/cheaper or worse BOTH?
|
|
|
Simon
|
| posted on 28/11/03 at 09:47 AM |
|
|
Make your own - you'll get them with the width/turn under etc and quality you want, and they'll cost you about £20 the pair
ATB
Simon
|
|
|
