rallyingden
|
| posted on 15/11/08 at 10:47 PM |
|
|
Cortina Wing Stays
Hi
Has anyone got any plans for wing stays for Cortina hubs that use the dust plate mounting points rather than the ball joint nut for a fixing
method.
Cheers
RD 
|
|
|
|
|
andylancaster3000
|
| posted on 16/11/08 at 12:54 AM |
|
|
http://www.locostbuilders.co.uk/viewthread.php?tid=96902&page=&contribmessage=none
I posted a few pics of ours that use the dust cover holes on this thread, about 1/2 way down on the 1st page.
HTH, Andy
|
|
|
Humbug
|
| posted on 16/11/08 at 09:24 AM |
|
|
Not plans as such, but here's a thread
showing how I made stays from flat bar bolted to a triangular plate which fixes into the dust plate holes with spacers
|
|
|
rusty nuts
|
| posted on 16/11/08 at 09:28 AM |
|
|
Have a look at David Jenkins post about a month ago .
|
|
|
rallyingden
|
| posted on 16/11/08 at 10:13 AM |
|
|
Thanks Guys
I thought of using triangular plate & picking up on dust cover threads, my only concern with this approach is that it presents more
"sharp" edges for the SVA man to pick up on..........
RD
[Edited on 16/11/08 by rallyingden]
|
|
|
.jpg)
