speedyxjs
|
| posted on 28/11/09 at 07:04 PM |
|
|
A request for measurements
Can someone measure the distance from the front of their nose to the front of the scuttle for me?
How long can i resist the temptation to drop a V8 in?
|
|
|
|
|
coozer
|
| posted on 28/11/09 at 07:07 PM |
|
|
From the end of my nose I extend my arm and touch the scuttle, depends if I tilt me head back....
1972 V8 Jago
1980 Z750
|
|
|
speedyxjs
|
| posted on 28/11/09 at 07:10 PM |
|
|
quote:
Originally posted by coozer
From the end of my nose I extend my arm and touch the scuttle, depends if I tilt me head back....
I knew there would be one lol 
How long can i resist the temptation to drop a V8 in?
|
|
|
stevec
|
| posted on 28/11/09 at 07:47 PM |
|
|
If you mean the tip of the nose to the front face of the scuttle my Indy is 147 cm.
|
|
|
speedyxjs
|
| posted on 28/11/09 at 08:41 PM |
|
|
quote:
Originally posted by stevec
If you mean the tip of the nose to the front face of the scuttle my Indy is 147 cm.
Brilliant, cheers 
How long can i resist the temptation to drop a V8 in?
|
|
|
Miks15
|
| posted on 28/11/09 at 10:35 PM |
|
|
why how longs your beast gunna be?
|
|
|
Nash
|
| posted on 28/11/09 at 10:49 PM |
|
|
quote:
Originally posted by Miks15
why how longs your beast gunna be?
Oh So many Lines So Little Time!!!! 
It's What You Do Next That Counts.
Build It, Buy It, Drive It:
Southern Kit Car Club
|
|
|
Miks15
|
| posted on 28/11/09 at 11:14 PM |
|
|
i thought about that as i was writing it, and a brief moment of thinking, "were all mature here" made me press post... mistake mabye
|
|
|
speedyxjs
|
| posted on 29/11/09 at 09:31 AM |
|
|
Well, my bonnet should be between 150 and 160cm. I just wanted to check it wont look completely ridiculous like if everyone elses was about 1 metre or
something
[Edited on 29-11-09 by speedyxjs]
How long can i resist the temptation to drop a V8 in?
|
|
|
Steve Hignett
|
| posted on 29/11/09 at 09:34 AM |
|
|
The bonnet on my MAC1 was 980mm in length..............
ETA - which obviously means that Locosts/MK's etc will all be the same at around 1metre or ever so slightly under...
[Edited on 29/11/09 by Steve Hignett]
|
|
|
