dnmalc
|
| posted on 5/10/05 at 08:37 PM |
|
|
Scuttle dimensions
I am about to build the scuttle, from my measurements it looks as if it should be 14 inches deep at the top rail level with the dash board at approx
60 degrees can anyone confirm these sizes and tell me how deep the scuttle is in the centre at the top. Thanks
|
|
|
|
|
dnmalc
|
| posted on 5/10/05 at 08:47 PM |
|
|
Sorry all I have just found the old threads on this topic.
One question left however are there any restrictions on how tight a radius you need to have on the outside edge?
|
|
|
