02GF74
|
 posted on 19/9/07 at 09:37 AM |
|
|
Farecla G3 & G7 - ok for buffing paintwork?
following on from my polish perpex thread, Farecla G3 & G7 was suggeswted.
Which one is the finer?
and can it be used for polish paint?
(going to get my painht today so will try to get some ofthis or equivalent)
|
|
|
|
|
Agriv8
|
| posted on 19/9/07 at 09:39 AM |
|
|
G3 is rough
G7 is Medium
G10 is fine
I have used all on my Gel coat but it is designed for automotive Paint
Regards
Agriv8
Taller than your average Guy !
Management is like a tree of monkeys. - Those at the top look down and see a tree full of smiling faces. BUT Those at the bottom look up and see a
tree full of a*seholes .............
|
|
|
DarrenW
|
| posted on 19/9/07 at 09:54 AM |
|
|
i normally go from G3 to G10. Never used G7 but would probs make the job easier.
|
|
|
02GF74
|
| posted on 19/9/07 at 09:57 AM |
|
|
is G10 fineer thatn T-cut? or what equivlent grade is T-cut?
|
|
|
