mad-butcher
|
| posted on 14/6/08 at 09:49 AM |
|
|
Mesh for grill
Need to mesh the grill for the SVA and I remember people saying they got it from B & Q I've had a look but the only one I could find was the
plasters one but it had large holes bigger than 10mm and was very sharp, what section in the store is the sva friendly stuff in other option is the
halfords stuff, would appreciate a photo of B & Q stuff
tony
|
|
|
|
|
smart51
|
| posted on 14/6/08 at 09:56 AM |
|
|
I got some stainless wire grille from halfords. Not exactly locost but very nice.
|
|
|
The Great Fandango
|
| posted on 14/6/08 at 11:05 AM |
|
|
I'd second the Ripspeed stainless racing mesh from Halfords... It's about £35 which gives you enough to make two 'seven' sized
grills.
Funny story about that actually... Didn't want to fork out £35 so looked on eBay. Offered £25 for the same item, he declined. Ended up winning
it for £4.50!
He Who Dies With The Most Toys Dies The Happiest
|
|
|
blakep82
|
| posted on 14/6/08 at 11:09 AM |
|
|
homebase sell sheets of mesh, 5mm holes, round wire (not that sharp stuff) in the garden section.
not actually sure what its made from... doesn't look like stainless, might be zinc plated steel i guess... had some in the garden for years and
its never rusted
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
graememk
|
| posted on 14/6/08 at 11:30 AM |
|
|
i borrowed the mesh for the indy pre cut to size from someone on here for sva, i was supposed to pay £5 postage for it but i didnt as i forgot who
sent it to me
anyway i still have it and will post it to you as long as you post it to the next person that needs it
 
graememksva2
sorry about photo size i'm in a rush no time to make it smaller.
[Edited on 14/6/08 by graememk]
|
|
|
paulmw
|
| posted on 14/6/08 at 12:17 PM |
|
|
You need a B&Q whore house
 
Rescued attachment DSCN0042.JPG
|
|
|
omega 24 v6
|
| posted on 14/6/08 at 12:49 PM |
|
|
quote:
You need a B&Q whore house
Or your local council skip site and rip the condensor off of the back of a fridge.
If it looks wrong it probably is wrong.
|
|
|
coozer
|
| posted on 14/6/08 at 12:51 PM |
|
|
In B&Q look down the hardware corridor, where the steel and ali bits and boobs are and there is a tall rack with loads of different mesh as well
as perpex sheets etc.
I used teh gold one which was only about £6 I think.
1972 V8 Jago
1980 Z750
|
|
|
afj
|
 posted on 14/6/08 at 07:04 PM |
|
|
quote:
Originally posted by coozer
In B&Q look down the hardware corridor, where the steel and ali bits and boobs are and there is a tall rack with loads of different mesh as well
as perpex sheets etc.
I used teh gold one which was only about £6 I think.
B&Q sell boobs?
|
|
|
