Board logo

Bowling and Grippo
BKLOCO - 28/2/06 at 06:51 PM

It would seem that B & G have stopped supplying partial kits.
Anyone know why?

BKLOCO - 28/2/06 at 07:10 PM

Bugger.
I wanted a v2.2 partial. I've got everything else to build a complete MSII V2.2 including the box.
Just need the board and Map sensor.

BKLOCO - 28/2/06 at 07:33 PM

Double bugger.
Wish you hadn't pointed me to that site now I'm looking at THIS Can I justify it?

CairB - 28/2/06 at 07:39 PM

quote:
Originally posted by BKLOCO
Double bugger.
Wish you hadn't pointed me to that site now I'm looking at THIS Can I justify it?


Yes

BKLOCO - 28/2/06 at 07:42 PM

It does look a nice bit of kit doesn't it?
It would make my task of tuning soooo much easier.
Trying to convince myself here.

TPG - 28/2/06 at 07:43 PM

There also Glens Garage in the US,I've got stuff from him using paypal.Not sure how his prices are against those above though.

BKLOCO - 28/2/06 at 08:30 PM

My problem is I've spent a fortune this month.
Gauges
Exhaust
Fuel filler.
Water hoses
All the fluids.
I think this is just going to have to wait a bit.

paulf - 28/2/06 at 09:02 PM

I bought the board processor and map sensor from bill Shurvinton , was £50 including postage.
I would like to find a supply for the boards only as i have a few processsors an map sensors spare.
Paul

quote:
Originally posted by BKLOCO
Bugger.
I wanted a v2.2 partial. I've got everything else to build a complete MSII V2.2 including the box.
Just need the board and Map sensor.

MikeR - 28/2/06 at 09:29 PM

bill also does the innovate kit and has experience of integrating it with the megasquirt / tunning etc.

stevebubs - 28/2/06 at 09:35 PM

quote:
Originally posted by BKLOCO
It would seem that B & G have stopped supplying partial kits.
Anyone know why?


Probably due to the Microsquirt project.

Partial kits should still be available from other sources (e.g. Glens Garage, Bill Shurvinton)

Microsquirt is/will be a tiny plug and go solution for both fuel and 4 pot ignition (2 onboard VB921s for wasted spark)

Bill S does indeed supply innovate (and other) wideband sensors. He has experience of integrating them with more than just the MS (also Emerald just to name one)

S

stevebubs - 28/2/06 at 10:01 PM

quote:
Originally posted by paulf
I bought the board processor and map sensor from bill Shurvinton , was £50 including postage.
I would like to find a supply for the boards only as i have a few processsors an map sensors spare.
Paul


I would have though Bill would be able to supply bare boards. If not, then Glen at www.glensgarage.com definitely can.

paulf - 28/2/06 at 10:11 PM

Bill only supplies the basic kit as in board processor and map sensor.
When I have some spare time i will try glenns garage, could then build a spare unit just in case.
Paul.

David Jenkins - 28/2/06 at 10:17 PM

They explain their change of policy on their website - they're trying to avoid competing with their approved dealers.

DJ

BKLOCO - 28/2/06 at 10:21 PM

quote:
Originally posted by David Jenkins
They explain their change of policy on their website - they're trying to avoid competing with their approved dealers.

DJ

I was looking for that David. I guessed that might be te case but I couldn't find it. Must be my age