Board logo

injectors
oadamo - 18/6/07 at 09:59 PM

i iam after some injectors 328-350cc do you no what car these sort of size injectors i could get them off
adam

djtom - 18/6/07 at 10:36 PM

Rover 620 / 820 / tomcat turbo :-)

About 380cc at 3.5 bar - 320ish at 3 bar

If it's for the zetec turbo you were building, then get the whole fuel rail assembly as the spacing is correct for the zetec, it has a fuel pressure regulator that compensates for boost and is easily adapted to fit other manifolds :-)

Just changed my plans to do exactly that, in fact.

Tom

BenB - 19/6/07 at 07:24 AM

Alternatively type "Stan Weiss Injector table" into google and you'll find a site with loads of different injectors, what rating they are and what cars they're in....

oadamo - 19/6/07 at 11:15 AM

quote:
Originally posted by djtom
Rover 620 / 820 / tomcat turbo :-)

About 380cc at 3.5 bar - 320ish at 3 bar

If it's for the zetec turbo you were building, then get the whole fuel rail assembly as the spacing is correct for the zetec, it has a fuel pressure regulator that compensates for boost and is easily adapted to fit other manifolds :-)

Just changed my plans to do exactly that, in fact.

Tom


hi yes there for my zetec ive just bought a turbo and these if my cals are right these sould be the right size. until ive bought some pistons and rods
adam

oadamo - 19/6/07 at 11:17 AM

quote:
Originally posted by BenB
Alternatively type "Stan Weiss Injector table" into google and you'll find a site with loads of different injectors, what rating they are and what cars they're in....


thanks very good link ill have to start keeping my eyes open to see what i can find
adam

djtom - 19/6/07 at 11:20 AM

My calcs suggest that they should be ok for about 230bhp at 85% duty cycle. Which will be ok for me at the moment:-)

Tom