Hi all

just getting together a list of what i need to put megasquirt on my car.

I will be using it for spark first then injection once spark is working and running for a bit,
is it possible to use the distributor (electronic bosch) as the sensor instead of a VR sensor on the crank pulley, still looking at using the ford Edis and coil pack but wondered if i really need the toothed signal

thanks in advance

Mark

[Edited on 4/1/09 by myeates]

yeah you will need a tooth trigger wheel signal, its just how the edis works

http://www.aeu86.org/viewtopic/tutorial--megasquirting-an-european-(map)-ae86-(4age)/p/96685

appears to show exactly that....

Usually trigger wheels have a missing tooth so an ECU can work out exactly what's going on. Obviously this wouldn't be happening with a dizzy based system....

http://www.302w.com/Windsor_MegaSquirt_Part6.aspx

it appears it's very do-able though!!!

hmmm, i stand corrected, said the man in the orthopedic shoes
not really sure how that works though

thanks for that will need to look into it a bit more before i do it. not sure how it works yet myself