I am fitting Yamaha throttle bodies to my Zetec and can't work out the wiring for the TPS.

The Ford wiring is as follows;
Brown/Green
Brown/Black
Brown

The Yamaha wiring is as follows;
Black
Yellow
Blue

Does anyone know which goes to which...please?

My notes from the R1 TBs say
yellow - signal
blue - +5v ref
black - earth

hope that helps

i previously asked a simular question and was redirected to this previous post, the "martyn_16V" test method sorted it fine
TPS colours

Thanks for that guys...all I need now is to work out the sequence for the Ford wires

the ford diagrams are on the megajolt site somewhere, but thier site is a bit hopeless i think. i can't find it, but its there