As the title says i am looking at wiring the horn through the wiper push on the stalk end on a sierra column . Does anyone have a diagram or could someone describe the corrrect way to do it.
you need a relay as the current draw is much higher
I am sure you have a reason for this... But why ???
Just out of interest..
and to answer your question...
Earth wire from the washer pump to a relay that powers the horn.
quote:
Originally posted by yellow melos
I am sure you have a reason for this... But why ???
Just out of interest..
and to answer your question...
Earth wire from the washer pump to a relay that powers the horn.
I did it also put my rear fogs on the wiper stalk but cant remember the exact wiring. I'll u2u you with it when I get home if no one comes up
with the answer before then.
Cheers,
Bob
If you look on the back of the stalks the terminals have numbers. Pressing the washer button closes the contact between Rs53C and Rs54.
Either you need a relay or you need to rely on the fact that the contacts might burn out eventually and you'll need to fit new stalks.
Considering how often I use my horn I'd happily fit it sans relay. The Sierra stalks are quite resiliant- just look at the wiring diagram how
many of the lighting circuits don't have relays......
My air horns are wired throught the wiper push switch also.. just use the switch to power a realy.
Plan to use the other wiper functions to launch the anti tank missile system when I get round to fitting it.
Paul