I'm thining down the blade loom but I can't identify one relay.

The code is omron G8MS-H34

Any ideas?

I think it might be something to do with the lights but I can't find it on google.

Cheers

Chris

photo would help chris, relays usually sit on top of ecu

I'll post one in a bit

cheers

Chris

Not sure if these help:

http://archive1.gwrra.org/discus4/messages/93986/176009.html?1215748081

how much for headlight?
also there is this thing behind the headlight along with all the wires
I think its a headlight relay or something but the thing is black and blue around the connecting point
OMRON
G8MS-H34
12V10A NC
0225d6
I need that piece

This is it
[img][/img]

Cheers

Chris

Any ideas chaps?

what year is wiring off ,can't find a pink (yet) in a 96/99 blade workshop manual


tony

The thing is I'm not sure.

I've only got the 92-95 wiring diagram, which doesn't have a pink wire either.

Bugger

Chris

bump

Isn't the pink wire in a later blade loom the immobiliser? Is in mine at least, mine's a 97.

On my GSXR's that *very same* relay is used on the fuel pump. It has a feed from the ECU to power it all up, a return to let the ECU it has done so, a yellow/red (from memory) to the pump, and a red/white straight from the main fuse to power it all up.
Could it be doing the same thing on your Blade?????