LocostBuilders - powered by XMB

VR Sensor Pinto bracket

karlak - 22/6/10 at 10:12 PM

Does anyone have a bracket that they may have used on a Pinto for a VR sensor. I know there are several sites showing homemade ones, but I am bloomin useless at making things like that.

It is the last bit I need to get my Megajolt up and running.

Cheers in advance and hope

[Edited on 22/6/10 by karlak]

blakep82 - 23/6/10 at 07:01 AM

not cheap, but anything from here any use?
http://trigger-wheels.com/store/contents/en-uk/d11.html

karlak - 23/6/10 at 07:16 AM

quote:
Originally posted by blakep82
not cheap, but anything from here any use?
http://trigger-wheels.com/store/contents/en-uk/d11.html

Thanks for the pointer... I think the issue there is that none of them are a direct fit. So I would end up bending, banging , grinding and swearing to get it to fit. Oh, and have cost me loads of money for the pleasure

Was hoping more for a direct bolt on to the pinto. Not sure that one exists, which is quite surprising, as if someone were to make up a batch I am sure money could be made ?

Anyway, if anyone does have anything they have used in the past and is now surplus to requirements please let me know.

Cheers

RichardK - 23/6/10 at 09:22 AM

If you get stuck I should be able to knock you one up, but you'd have to tell me the dia of your trigger wheel, I've got pictures in my gallery (link on the banner below) but you'd have to drill the mounting holes.

Cheers

Rich

RichardK - 23/6/10 at 08:31 PM

Didn't have anything to do tonight so here you are..

Your Megajolt Sensor Bracket

Hopefully you'll be able to weld them where they meet, have left a bit extra on at the ends so you may have the cut them shorter.

Cheers Rich

RichardK - 23/6/10 at 08:31 PM

Looks better than the original version

My Megajolt Sensor Bracket

[Edited on 23/6/10 by RichardK]

karlak - 27/6/10 at 06:35 PM

Thanks Rich,

it has arrived safely. Many thanks for your help and hopefully will get it all fitted this week.

You are a true Gent and a Saint