I have a new alt from a Mk1 (apparently) Nissan Micra but have no idea where the wires go as there's no indication on the back.

Any help would be apreciated (in dumb ass english please!! cos i iz stoooopid!) Image deleted by owner

[img][/img]

[Edited on 25/1/06 by donut]

Andy - give Mark H a call, he knows. Im sure one of them is left unconnected and the other takes a feed from the main live to battery. There is a sensor inside the alternator that tries to keep the charging voltage stable irrespective of revs etc.

Ill try and take a look at mine later as well.

Cheers dude, i'll drop Mark an email so he can have a look at his leisure.

A=Ignition connection
B=Lamp
C=Derrr to battery (heavy charging lead)
Standard Jap wiring I think
Cheers,
Bob

[Edited on 25/1/06 by splitrivet]

Ah yes - B charge lamp. I didnt have to connect this cos DD2 has current sensing built in. If you are running a std dash config you will run this to the charge light on dash.

I connected A to C to feed the built in current sensor circuit. Mark wil be able to confirm for sure.

Superb stuff, cheers fellas!!