Board logo

Wiring now finished YAY!
donut - 15/2/06 at 05:23 PM

BIG Thanks to Jason aka deckman001 for finishing my wiring today. I know jack about wiring as many on here will tell you so i'm really pleased that it's done.

And everything works that can be tested


flak monkey - 15/2/06 at 05:36 PM

Brilliant. Whens it going to be finished then? Cant be far off if the wirings in?

David


donut - 15/2/06 at 05:39 PM

Should be finished bar the exhaust by the end of next week.... wind in the right direction!! yipeeeeee!


Deckman001 - 15/2/06 at 06:03 PM



Jason


donut - 15/2/06 at 07:42 PM

The Edis 4 will be used on the Zetec when it goes in next winter...unless someone throws a HUGE V8 in my direction The coil i didn't use for some reason..can't think why now????

I will be puting the car back together next week so i may take a few pictures then.



[Edited on 15/2/06 by donut]


bob - 15/2/06 at 08:03 PM

Well done Deckman001 for completing or should i say completely wiring donuts car


Well done donut for breathing in and out i'm impressed


donut - 15/2/06 at 08:39 PM

It was tough but i got there!!


Peteff - 15/2/06 at 10:57 PM

+ is positive usually red, - is negative usually black on the box thing with the electric in it, battery I think it's called.


donut - 15/2/06 at 11:01 PM

Cheeky monkey!


Deckman001 - 16/2/06 at 09:14 AM

Nobody Panic, I didn't let him anywhere near the battery or car wiring this time !!

Jason


donut - 16/2/06 at 09:31 AM

Cheers J, you trying to make me look more like a numpty than i already am!?!?!?


bob - 16/2/06 at 09:32 AM

so its just the other fitted parts to worry about then


donut - 16/2/06 at 09:43 AM

Every nut and bolt mate.....every nut and bolt


ned - 16/2/06 at 11:19 AM

pop the kettle on Andy


bob - 16/2/06 at 11:27 AM

And empty the hoover bag


donut - 16/2/06 at 11:30 AM

Done & Done!!