no pic.... just a simple question

seeing as it is possible to buy almost all the components for the megajolt and solder it yourself:
is it possible to buy the printed circuit board from a specialist electronics shop or does it have to be manufactured according to Megajolt requirements? i.e. can i source the board by myself?

what are the specs? or what do i have to ask for?

Thanks!

Custom made printed circuit boards are made using a photographic etching method and are not really possible using domestic equipment. The only choice is to purchase one from someone who has had a batch made (usually 100 minimum) as the setup costs are very high, especially where multilayer boards are concerned.
Veroboard is not an option


[Edited on 21-3-07 by RazMan]

If you have the artwork for the board I can get it photoetched....

But I can only do single sided boards!

You can actually buy a kit of parts, which includes the board plus all the resistors etc. I am not aware of anybody that sells just the board, sorry. HTH Ray

thoguht they were sold as standard item in a radio shack or something... cheers...

Creación de Circuitos

Tienda

Saludos
Modesto

linky to who is selling these?

(is pcb arwork on the web?)

http://www.iberfutura.es/Carrito/Main.asp

Or you can try:

http://www.instructables.com/id/EN4JHYI8R7EYF7IYHZ/

Cheers,
Modesto