Done some searches but Im probably being thick and they were inconclusive!

So here's the question. Savage Hazard switch, Sierra indicator stalk and an electronic relay, (pins are marked +, -, R and C)

So what goes to where? A roughly drawn wiring diagram would be excellent, failing that a pin A to Pin B discription would be just a good!!!!!

Look forward to your help guys!

Ian

OK, Ive sorted this. Ill post up a diagram for future reference later.

Cheers ive been watching waiting to see if there was an answer

Diagram in my photo archive

OK, Ive now wired this up and confirm it works. However please note that I am not using either the light in the switch or the light marked IND on the drawing as an indication that the hazards are on. For this I am using the indicator lamps on the Hayabusa dash.

Hope this helps peeps!!!