Mornin all,

Does anyone know of a supplier for the wiring needed to connect up a MegaJolt system. I am just after the wiring to make up a loom rather than a made up loom and did find a link to someone who would supply either a basic or comprehensive kit of wires but typically now cant find it!! DOH!!!

I could go to VWP or Premier i guess but this kit seemed pretty cost effective without all the hastle of ordering the bits individually

Cheers

Isn't the company something like www.trigger-wheels.com

Pete

[Edited on 22/2/08 by r1_pete]

Found it!! Cheers mate. Not as cheap as i remember mind!!

http://trigger-wheels.com/store/index1.html?target=d9.html

Me being a bit of a spaz this morning typed in .co.uk first time!!

[Edited on 22/2/08 by Paul TigerB6]

They have wiring and connectors, look in the index in the blue box down the left of the site:
http://trigger-wheels.com/store/index1.html?target=d6.html

I bought my kit from this company on the net.
http://www.diyautotune.com/catalog/megasquirt-wiring-bundle-1239-long-p-101.html

Thanks for the links. I think on balance I will just sort out what i need from VWP. I am going to need some non-adhesive loom tape anyway so will get it all together. Seems pointless paying for 4m lengths when i will only need 2m max.

If you have a decent scrapyard near you it is possible to remove the complete ignition loom from some fiestas that are fitted with edis ignition.Then just shorten as neccesary and solder and heatshrink the joints then wrap with loom tape.You will need to get the edis plug from a breakers as I havent seen them available new.
Paul.